Large Horizontal Axis Wind Turbine

• Customization: Available
• After-sales Service: Free Technical Guidance
• Warranty: Five Years
• Model NO.: JM-60-1000KW
• Output Type: AC Three Phase
• Number of Blade: Three Blade
• Rotating Shaft: Horizontal
• Stress Way of Blade: Resistance
• Power: ＞100kW
• Phase: Three-Phase
• Certification: CE
• Rated Power: 1MW
• Rated Voltage V: 550VDC~1100VDC
• Cut-in Wind Speed M/: 3
• Rated Wind Speed M/S: 10
• Cut-out Wind Speed M/S: 21
• Maximum Wind Speedm/S: 70(IEC S)
• Wind Wheel Diam Meter: 60/70
• Rated Speed of Wind Wheel Rpm: 20
• Blade Material: Glass Fiber Reinforced Polyester/Epoxy Resin
• Generator Type: Permanent Magnet Synchronous Generator
• Generator Rated Power Kw: 1180
• Generator Rated Voltage V: 720
• Margin Level: H
• Cooling Method: Air Cooling
• Transport Package: Bulk Ship Transportation
• Specification: 5.2*3.6*4.3m 139900KG
• Trademark: Pinxin
• Origin: China
• HS Code: 850231000
• Production Capacity: 1 Pieces/Year
• Package Size: 520.00cm * 360.00cm * 430.00cm
• Package Gross Weight: 23500.000kg

Product Description

Technical features
Unit type: three-blade, horizontal axis, upwind, variable pitch and variable speed wind turbine
Variable pitch system: active variable pitch, can adapt to wind speeds of 3-25 meters
Yaw system: active yaw, unmanned, automatic wind
Full power inverter system Low voltage ride-through system Safety wind resistance system
SCADA remote monitoring system: remote management, monitoring, maintenance;
Smart wind turbine: real-time online monitoring of wind turbines; online optimization and upgrade;
Control strategy
The control system has a hardware line safety chain protection device, and the software design also adopts multi-layer protection measures. The protection link is designed based on the principle of failure protection. When the unit cannot operate normally due to internal or external faults, the system safety protection device will be activated to protect the fan in a safe state. The system automatically performs protection functions in the following situations: overspeed, generator overload, over-vibration, power grid or load loss, severe storm weather, etc.
System startup:
About 5 minutes after the system is powered on, the system self-check is completed. At this time, if the fault light on the control cabinet door is on, the "State" on the system operation screen shows "general fault" or other faults. After checking that all systems are normal, press the "Reset" button on the control cabinet door to reset the system. The "Fault" indicator light goes out and the "State" shows "normal", indicating that the system has entered a normal state; at this time, if the superior startup command is received, the system starts to run automatically; if the wind speed reaches the system cut-in wind speed, the "Run" indicator light on the control cabinet is on, and the system starts to run automatically.